2012

For example, if all the colors in a color-dependent plot style table have the
same plot properties, CONVERTCTB creates only two named plot styles in the
named plot style table: NORMAL, the default plot style, and STYLE 1, which
assumes the plot properties that were assigned to all the colors in the
color-dependent plot style table. However, suppose that all the colors in a
color-dependent plot style table have the same plot properties except for two
colors, BLUE and GREEN. If these colors each have unique plot properties,
CONVERTCTB creates four named plot styles in the named plot style table:
NORMAL, the default plot style; STYLE 1, which assumes the plot properties
of GREEN; STYLE 2, which assumes the plot properties of BLUE; and STYLE
3, which assumes the plot properties that were assigned to all the other colors.
CONVERTCTB gives the plot styles in the new named plot style table generic
names such as STYLE 1, STYLE 2. You can modify these generic plot style
names in the Plot Style Table Editor. Click the Edit button on the Plot Device
tab in the
Page Setup dialog box. If you want to rename the plot styles, you
must do so before applying them to drawing layouts.
CONVERTPSTYLES
Quick Reference
See also:
■ Switch the Type of Plot Style Table
Converts the current drawing to either named or color-dependent plot styles.
Summary
A drawing can use either named or color-dependent plot styles, but not both.
CONVERTPSTYLES converts a currently open drawing from color-dependent
plot styles to named plot styles, or from named plot styles to color-dependent
plot styles, depending on which plot style method the drawing is currently
using.
When you convert a drawing, CONVERTPSTYLES sets the PSTYLEMODE
system variable to the appropriate setting (0 = named, 1= color-dependent).
For example, a drawing using color-dependent plot styles assigns plot properties
to objects and layers by color. In other words, all objects with the same color
have the same plot properties. CONVERTPSTYLES converts the drawing to
use named plot styles that can be applied to objects or layers independent of
232 | Chapter 4 C Commands