2012

Base Specifies the Base Location property for the parameter.
■ Startpoint. The start point of the parameter remains fixed when the
endpoint of the parameter is edited in the block reference.
■ Midpoint. The midpoint of the parameter remains fixed, and the start
point and endpoint of the parameter move simultaneously equal distances
from the midpoint.
Palette
Palette on page 156
Value Set Limits the available values for the parameter to the values specified
in the set.
■ List. Specifies a list of available values for the parameter in a block reference.
■ Increment. Specifies a value increment and minimum and maximum values
for the parameter in the block reference.
Specify Label Location Specifies the location of the
parameter label on page
156 in the block definition.
Enter Number of Grips Determines the number of grips that will display in
the block reference.
■ 0. No grips will be displayed in the block reference. Rather, the selected
geometry can be edited in the Properties palette or a
lookup table on page
142.
■ 1. A grip will be displayed at just the endpoint of the parameter.
■ 2. A grip will be displayed at both the start point and endpoint of the
parameter.
Polar
Button
Block Editor contextual tab ➤ Action Parameters panel ➤ Action Parameters
drop-down ➤ Polar
Defines a distance and angle for two key points in the block definition.
Specify Base Point Determines the point in the block definition relative to
which the grip will be placed.
Name
Name on page 155
BPARAMETER | 157