2012

Stores the center of view in the current viewport.
Expressed as a UCS coordinate.
VIEWDIR
Quick Reference
See also:
■ Change to a View of the XY Plane
(Read-only)
3D-vectorType:
DrawingSaved in:
0.0000,0.0000,1.0000Initial value:
Stores the viewing direction in the current viewport, expressed in UCS
coordinates.
This describes the camera point as a 3D offset from the target point.
VIEWMODE
Quick Reference
See also:
■ Save and Restore Views
(Read-only)
IntegerType:
DrawingSaved in:
0Initial value:
Stores the View mode for the current viewport.
The setting is stored as a bitcode using the sum of the following values:
Turned off.0
Perspective view active.1
1712 | Chapter 47 V System Variables