2012

UCSFOLLOW
Quick Reference
See also:
■ Overview of the User Coordinate System (UCS)
IntegerType:
DrawingSaved in:
0Initial value:
Generates a plan view whenever you change from one UCS to another.
The UCSFOLLOW setting is saved separately for each viewport. If UCSFOLLOW
is on for a particular viewport, a plan view is generated in that viewport
whenever you change coordinate systems.
Once the new UCS has been established, you can use PLAN, VIEW, or VPOINT
to change the view of the drawing. It will change to a plan view again the
next time you change coordinate systems.
UCS does not affect the view0
Any UCS change causes a change to the plan view of the
new UCS in the current viewport
1
The setting of UCSFOLLOW is maintained separately for paper space and
model space and can be accessed in either, but the setting is ignored while in
paper space (it is always treated as if set to 0). Although you can define a
non-world UCS in paper space, the view remains in plan view to the world
coordinate system.
UCSICON
Quick Reference
See also:
■ Control the Display of the User Coordinate System Icon
UCSFOLLOW | 1701