2012

and then a fit-type curve is applied to those segments. Fit-type curves use arcs
as the approximating segments. Using arcs yields a smoother generated curve
when few segments are specified, but the curve can take longer to generate.
SPLINETYPE
Quick Reference
See also:
■ Modify Polylines
IntegerType:
DrawingSaved in:
6Initial value:
Sets the type of curve generated by the Spline option of the PEDIT command.
Quadratic B-spline5
Cubic B-spline6
SPLKNOTS
Quick Reference
See also:
■ Modify Splines
IntegerType:
Not-savedSaved in:
0Initial value:
Stores the default knot option for the SPLINE command when specifying fit
points.
Chord distance0
Square root of chord distance1
1666 | Chapter 44 S System Variables