2012

RegistrySaved in:
0Initial value:
Sets the location for the Quick Properties palette.
The Quick Properties palette is displayed relative to the
location of the cursor
0
The Quick Properties palette is displayed in a fixed location
that is independent of the cursor
1
QPMODE
Quick Reference
See also:
■ Display and Change the Properties of Objects
IntegerType:
RegistrySaved in:
-1Initial value:
Controls whether the Quick Properties palette is displayed when objects are
selected.
Turns off the display of the Quick Properties palette for all
objects when they are selected in the drawing area
0
Turns on the display of the Quick Properties palette for all
objects when they are selected in the drawing area
1
Turns on the display of Quick Properties palette, but only
for objects that are supported in the Customize User Inter-
2
face (CUI) editor for displaying quick properties when they
are selected in the drawing area
NOTE When this system variable is set to a negative number, the feature is turned
off but the value is retained. To use this feature, the PICKFIRST system variable
must be set to 1 (on).
1632 | Chapter 42 Q System Variables