2012

Controls the number of points displayed at once for all point clouds in the
drawing view.
The system variable value is a percentage of 1,500,000, which is the maximum
number of points that can exist in a drawing, regardless of the number of
point clouds attached to a single drawing.
For example, if the system variable is set to 1, a maximum of 15,000 points
is displayed at one time, even if there are multiple point clouds displayed on
the screen. The 15,000 points are evenly distributed between the viewable
point clouds.
POLARADDANG
Quick Reference
See also:
■ Use Polar Tracking and PolarSnap
StringType:
RegistrySaved in:
""Initial value:
Stores additional angles for polar tracking and polar snap.
You can add up to 10 angles. Each angle can be separated with semicolons (;).
The AUNITS system variable sets the format for display of angles.Unlike
POLARANG, POLARADDANG angles do not result in multiples of their values.
The bit value for the POLARMODE system variable must have 4 turned on for
POLARADDANG to have an effect.
When using fractions of an angle, set the AUPREC system variable (angular
precision) to a higher value. Otherwise, the POLARADDANG value will be
rounded off.
1618 | Chapter 41 P System Variables