2012

DrawingSaved in:
0Initial value:
Controls how MIRROR reflects text.
Retains text direction0
Mirrors the text1
MLEADERSCALE
Quick Reference
See also:
■ Modify Leaders Using Grips
RealType:
DrawingSaved in:
1.0000Initial value:
Sets the overall scale factor applied to multileader objects.
Use
DIMSCALE to scale leader objects created with the LEADER command.
A reasonable default value is computed based on the
scaling between the current model space viewport and
0.0
paper space. If you are in paper space or model space and
not using the paper space feature, the scale factor is 1.0.
A scale factor is computed that leads text sizes, arrowhead
sizes, and other scaled distances to plot at their face values.
>0
MLEADERSCALE does not affect measured lengths, coordinates, or angles.
When MLEADERSCALE is set to 0, and the current multileader style is not ,
the overall multileader scale of multileader objects created in paper space
viewports is determined by the viewport scale. When the current multileader
style is annotative, the MLEADERSCALE value is set to 0. Changes to the
MLEADERSCALE value are ignored and the value is reset to 0.
1582 | Chapter 38 M System Variables