2012

This value is not affected by the settings of the AUNITS and AUPREC system
variables.
LAYEREVAL
Quick Reference
See also:
■ Use New Layer Notification
■
LAYEREVALCTL on page 1564
■ LAYERNOTIFY on page 1566
IntegerType:
DrawingSaved in:
0Initial value:
Specifies whether the layer list is evaluated for new layers when added to the
drawing or to attached xrefs.
The setting is stored in an integer using one of the following values:
Off0
Detects when new xref layers have been added in the
drawing
1
Detects when new layers have been added in the drawing
and xrefs
2
NOTE LAYEREVALCTL overrides the LAYEREVAL and LAYERNOTIFY setvars when
LAYEREVALCTL = 0. It acts like a global off (but not a global on). There is no effect
even if LAYEREVALCTL is turned on if LAYERNOTIFY = 0 or LAYEREVAL = 0.
LAYEREVALCTL must be set to 1 for LAYERNOTIFY and LAYEREVAL to function
correctly.
LAYEREVAL | 1563