2012

(Read-only)
RealType:
Not-savedSaved in:
0.0000Initial value:
Stores the end angle of the last arc entered relative to the XY plane of the
current UCS for the current space.
LASTPOINT
Quick Reference
See also:
■ Overview of Coordinate Entry
3D-pointType:
Not-savedSaved in:
0.0000,0.0000,0.0000Initial value:
Stores the last point specified, expressed as UCS coordinates for the current
space.
You can reference the last point specified by entering the @ symbol at a point
prompt. This is equivalent to entering @0,0,0.
LATITUDE
Quick Reference
See also:
■ Specify the Geographic Location of a Drawing
RealType:
DrawingSaved in:
37.7950Initial value:
Specifies the latitude of the drawing model in decimal format.
The default is the latitude of San Francisco, California. The valid range is -90
to +90. Positive values represent north latitudes.
This value is affected by the settings of the LUPREC system variable.
1562 | Chapter 37 L System Variables