2012

Doubling specifies a second set of lines drawn at 90 degrees to the original
lines.
Turns off hatch pattern doubling0
Turns on hatch pattern doubling1
HPDRAWORDER
Quick Reference
See also:
■ Set Property Overrides for Hatches and Fills
IntegerType:
Not-savedSaved in:
3Initial value:
Controls the draw order of hatches and fills.
Controls whether hatch and fill objects are displayed in front or behind all
other objects, or in front or behind their associated boundaries.
None. The hatch or fill is not assigned a draw order.0
Send to back. The hatch or fill is sent to the back of all
other objects.
1
Bring to front. The hatch or fill is brought to the front of
all other objects.
2
Send behind boundary. The hatch or fill is sent behind
the hatch’s boundary objects.
3
Bring in front of boundary. The hatch or fill is brought in
front of the hatch’s boundary objects.
4
HPDRAWORDER | 1539