2012

If dynamic prompts are on (DYNPROMPT is set to 1), they are displayed when
DYNMODE is set to 1, 2, or 3.
When dimensional input is turned on (DYNMODE = 2 or 3), the program
switches to pointer input when you enter a comma or an angle bracket (<),
or when you select multiple grip points.
When DYNMODE is set to 1, 2, or 3, you can turn off all features temporarily
by holding down the temporary override key, F12.
Settings are on the Dynamic Input tab in the
Drafting Settings dialog box.
DYNPICOORDS
Quick Reference
See also:
■ Use Dynamic Input
SwitchType:
RegistrySaved in:
0Initial value:
Controls whether pointer input uses relative or absolute format for coordinates.
Relative0
Absolute1
The DYNMODE system variable turns Dynamic Input features on and off.
DYNPIFORMAT
Quick Reference
See also:
■ Use Dynamic Input
SwitchType:
DYNPICOORDS | 1493