2012

DIMTIX
Quick Reference
See also:
■ Fit Dimension Text Within Extension Lines
SwitchType:
DrawingSaved in:
OffInitial value:
Draws text between extension lines.
For linear and angular dimensions, dimension text is placed
inside the extension lines if there is sufficient room.
Off
Draws dimension text between the extension lines even
if it would ordinarily be placed outside those lines. For ra-
On
dius and diameter dimensions, DIMTIX on always forces
the dimension text outside the circle or arc.
DIMTM
Quick Reference
See also:
■ Display Lateral Tolerances
RealType:
DrawingSaved in:
0.0000Initial value:
Sets the minimum (or lower) tolerance limit for dimension text when DIMTOL
or DIMLIM is on.
DIMTM accepts signed values. If DIMTOL is on and DIMTP and DIMTM are
set to the same value, a tolerance value is drawn.
If DIMTM and DIMTP values differ, the upper tolerance is drawn above the
lower, and a plus sign is added to the DIMTP value if it is positive.
1472 | Chapter 31 D System Variables