2012

5Initial value:
Determines the size of the crosshairs as a percentage of the screen size.
Valid settings range from 1 to 100 percent. When set to 100, the crosshairs
are full-screen and the ends of the crosshairs are never visible. When less than
100, the ends of the crosshairs may be visible when the cursor is moved to
one edge of the screen.
CVPORT
Quick Reference
See also:
■ Select and Use the Current Viewport
IntegerType:
DrawingSaved in:
2Initial value:
Displays the identification number of the current viewport.
You can change this value, which changes the current viewport, if the
following conditions are met:
■ The identification number you specify is that of an active viewport.
■ A command in progress has not locked cursor movement to that viewport.
■ Tablet mode is off.
CVPORT | 1425