2012

Command Modifiers
You can use command modifiers to help you locate points or select objects while a command
is in progress. Use the Coordinate Filter, Direct Distance Entry, From, MTP, and Tracking
command modifiers at any prompt that requires point specification. Use the Selection Mode
command modifiers at any prompt that requires object selection.
Coordinate Filters (Command Modifier)
Quick Reference
See also:
■ Combine Coordinate Values (Coordinate Filters)
Combines X, Y, and Z values from different points to specify a single point
Command entry: Enter .x, .y, .xy, .xz, or .yz
At any prompt for locating a point, you can enter point filters to specify a single
coordinate by extracting the X, Y, and Z values of several points. In the following
example, the start point for the line has a coordinate constructed from the X
value of the midpoint of the first object you select, with the Y and Z values of
the midpoint of the second object you select.
Command: line
Specify first point: .x
of mid
of Select an object
of (need YZ) mid
of Select another object
To point: Specify a point
26
1369