2012

Object Zooms to display one or more selected objects as large as possible and
in the center of the view. You can select objects before or after you start the
ZOOM command.
Real Time Zooms interactively to change the magnification of the view.
The cursor changes to a magnifying glass with plus (+) and minus (-) signs.
See
Zoom Shortcut Menu on page 1367 for a description of the options that are
available while zooming in real time.
Holding down the pick button at the midpoint of the window and moving
vertically to the top of the window zooms in to 100%. Conversely, holding
the pick button down at the midpoint of the window and moving vertically
to the bottom of the window zooms out by 100%.
When you reach the zoom-in limit, the plus sign in the cursor disappears,
indicating that you can no longer zoom in. When you reach the zoom-out
limit, the minus sign in the cursor disappears, indicating that you can no
longer zoom out.
When you release the pick button, zooming stops. You can release the pick
button, move the cursor to another location in the drawing, and then press
the pick button again and continue to zoom the display from that location.
To exit zooming, press Enter or Esc.
Zoom Shortcut Menu
Quick Reference
See also:
■ Pan or Zoom a View
Shortcut menu allows you to switch between pan and different zoom options.
Summary
When the ZOOM command is active, you can exit ZOOM or switch to PAN
using the options on the Zoom shortcut menu. To access the Zoom shortcut
menu, right-click in the drawing area while ZOOM is active.
Zoom Shortcut Menu | 1367