2012

In a perspective view, ZOOM displays the 3DZOOM prompts.
NOTE You cannot use ZOOM transparently during VPOINT or while ZOOM, PAN,
or VIEW is in progress.
List of Prompts
The following prompts are displayed.
Specify corner of window, enter a scale factor (nX or nXP), or
[All on page 1364/Center/Dynamic/Extents on page
1365/
Previous/Scale/Window/Object] <real time>
All Zooms to display all visible objects and visual aids.
Adjusts the magnification of the drawing area to accommodate the extents
of all visible objects in the drawing, or visual aids such as the grid limits (the
LIMITS command), whichever is larger.
In the illustration on the right, the grid limits are set to a larger area than the
extents of the drawing.
Because it always regenerates the drawing, you cannot use ZOOM All
transparently.
Center Zooms to display a view defined by a center point and a magnification
value or a height. A smaller value for the height increases the magnification.
A larger value decreases the magnification. Not available in perspective
projection.
1364 | Chapter 25 Z Commands