2012

Block Editor contextual tab ➤ Action Parameters panel ➤ Actions drop-down
➤ Scale
Specifies that the selection set of objects scales relative to the defined base
point when the action is triggered in a dynamic block reference. A scale action
can only be associated with a linear, polar, or XY parameter.
Select Parameter
Select Parameter on page 99
Select Objects
Select Objects on page 99
Specify Action Location
Specify Action Location on page 99
Base Type
Base Type on page 101
■
Dependent on page 101
■
Independent on page 101
XY When an XY parameter is selected, sets the Scale Type custom property.
■ X.
Scales the selected object only along the X-axis of the XY parameter.
■ Y
. Scales the selected object only along the Y-axis of the XY parameter.
■ XY
. Scales the selected object along both the X- and Y-axes of the XY
parameter.
Stretch
Button
Block Editor contextual tab ➤ Action Parameters panel ➤ Actions drop-down
➤ Stretch
Specifies that the selection set of objects will stretch or move when the action
is triggered in a dynamic block reference. A stretch action can be associated
with a point, linear, polar, or XY parameter.
Select Parameter
Select Parameter on page 99
Specify Parameter Point When a linear or polar parameter is selected,
determines whether the start or end point of the parameter is used to determine
the base point of the action.
When an XY parameter is selected, determines which corner of the parameter
will be associated with the action. The objects selected for the action will be
stretched relative to this point.
102 | Chapter 3 B Commands