2012

Name
Identifies the DWG you have selected to attach.
Browse
Displays the Select Reference File dialog box (a
standard file selection dialog
box
), in which you can select a new external reference for the current drawing.
Preview
Displays the DWG you have selected to attach.
Reference Type
Specifies whether the external reference is an attachment or an overlay. Unlike
an xref that is an attachment, an overlay is ignored when the drawing to
which it is attached is then attached as an xref to another drawing.
Locate using Geographic Data
Attaches drawings using geographic data as the reference.
Scale
Specify On-screen
Allows you to input at the Command prompt or the pointing device.
X
Sets the X scale factor.
Y
Sets the Y scale factor.
Z
Sets the Z scale factor.
Uniform Scale
Sets the Y and X scale factors as the same as Z.
Insertion Point
Specify On-Screen
Allows you to input at the Command prompt or the pointing device.
X
Sets the X coordinate value.
Y
Attach External Reference Dialog Box | 1345