2012

Specifies that the selection set of objects arrays when the action is triggered
in a dynamic block reference. An array action can be associated with a linear,
polar, or XY parameter.
Select Parameter Select a parameter to associate with the action.
Select Objects Defines the objects that will be included in the action when
modified.
Enter Distance Between Columns When a linear or polar parameter is
selected, specifies the distance between the selected objects when the array
action is modified. To specify the distance, use the mouse pointer.
■ Specify opposite corner.
Enter Distance Between Rows or Specify Unit Cell When an XY parameter
is selected, specifies the distance between the selected objects when the array
action is modified. To specify the distance, use the mouse pointer. To specify
unit cell, enter two values separated by a comma for each of the two points.
Specify Action Location When
BACTIONBARMODE on page 1396 is set to 0,
determines where the action is placed within the Block Editor.
Lookup
Button
Block Editor contextual tab ➤ Action Parameters panel ➤ Actions drop-down
➤ Lookup
The lookup action displays the Property Lookup Table dialog box where you
can create a lookup table for the block reference.
Flip
Button
Block Editor contextual tab ➤ Action Parameters panel ➤ Actions drop-down
➤ Flip
A set of objects is flipped around the reflection line of the flip parameter when
the action is triggered in the block reference. A flip action can only be
associated with a flip parameter.
BACTIONTOOL | 99