2012

Creates multiple viewports in model space.
Summary
The number and layout of active viewports and their associated settings are
called viewport configurations.
List of Prompts
The following prompts are displayed.
Enter an option [Save/Restore/Delete/Join/Single/?/2/3/4] <3>: Enter an option
Save Saves the current viewport configuration using a specified name.
Restore Restores a previously saved viewport configuration.
Delete Deletes a named viewport configuration.
Join Combines two adjacent model viewports into one larger viewport.
The two model viewports must share a common edge of the same length. The
resulting viewport inherits the view of the dominant viewport.
Single Returns the drawing to a single viewport view, using the view from
the current viewport.
?—List Viewport Configurations Displays the identification numbers and
screen positions of the active viewports.
The lower-left and upper-right corners of the viewport define its location. For
these corners, values between 0.0,0.0 (for the lower-left corner of the drawing
area) and 1.0,1.0 (for the upper-right corner) are used. The current viewport
is listed first.
-VPORTS | 1323