2012

Access Methods
Command entry: bedit ➤ bactionset
Shortcut menu: Select an action in the block definition. Right-click in the
Block Editor drawing area. Click Action Selection Set, and then click an option.
Summary
Re-specifies the selection set of objects associated with an action by creating
a new selection set or by adding to or removing objects from the existing
selection set. You can only use the BACTIONSET command in the
Block Editor
on page 127.
NOTE The BACTIONSET command is disabled when the BACTIONBARMODE on
page 1396 system variable is set to 1.
List of Prompts
The following prompts are displayed.
Select action: Select an action in the current dynamic block definition
Specify Selection Set
Creates a new selection set for the selected action, or modifies an existing
selection set.
Select objects Defines the objects that will be included in the action when
modified.
Remove Removes objects from the original selection set associated with the
selected action.
Specify Stretch Frame Creates a box that represents the boundary area for
the action when modified.
■ Specify opposite corner.
■ Specify objects.
CPolygon Creates a polygon that represents the boundary area for the action
when modified.
■ First polygon point.
■ Specify endpoint.
Specify Objects to Rotate Only Determines the objects in the selection that
will rotate and not stretch.
BACTIONSET | 97