2012

-UNITS
Quick Reference
See also:
■ Determine the Units of Measurement
Controls coordinate and angle display formats and precision.
List of Prompts
The following prompts are displayed.
Report formats: (Examples)
1. Scientific 1.55E+01
2. Decimal 15.50
3. Engineering 1'-3.50"
4. Architectural 1'-3 1/2"
5. Fractional 15 1/2
Enter choice, 1 to 5 <current>: Enter a value (1-5) or press Enter
The following prompt for decimal precision is displayed if you specify the
scientific, decimal, or engineering format:
Enter number of digits to right of decimal point (0 to 8) <current>: Enter a value
(0-8) or press Enter
The following prompt for the denominator of the smallest fraction is displayed
if you specify the architectural or fractional format.
Enter denominator of smallest fraction to display
(1, 2, 4, 8, 16, 32, 64, 128, or 256) <current>: Enter a value (1, 2, 4, 8, 16, 32, 64,
128, or 256) or press Enter
The next prompt is for angle formats and precision:
Systems of angle measure: (Examples)
1. Decimal degrees 45.0000
2. Degrees/minutes/seconds 45d0'0"
3. Grads 50.0000g
4. Radians 0.7854r
5. Surveyor's units N 45d0'0" E
Enter choice, 1 to 5 <current>: Enter a value (1-5) or press Enter
Enter number of fractional places for display of angles (0 to 8) <current>: Enter
a value (0-8) or press Enter
-UNITS | 1293