2012

Offset When BACTIONBARMODE on page 1396 is set to 0 and the action is
triggered, increases or decreases the angle of the selected parameter by the
specified value.
XY When an XY parameter is selected, specifies whether the distance applied
to the action is the parameter's X distance, Y distance, or XY distance from the
parameter's base point.
Rotate
Specifies that the selection set of objects rotates when the action is triggered
in a dynamic block reference. A rotate action can only be associated with a
rotation parameter.
Specify Selection Set Determines the objects that will be rotated about the
parameter base point.
Scale
Specifies that the selection set of objects scales relative to the defined base
point when the action is triggered in a dynamic block reference. A scale action
can only be associated with a linear, polar, or XY parameter.
Select Objects
Select Objects on page 92
Specify Action Location
Specify Action Location on page 92
Base Type Specifies whether the base point for the action is dependent or
independent of the associated parameter’s base point.
Dependent Scales or moves selected objects relative to the base point of the
associated parameter.
Independent Scales or moves selected objects relative to a base point defined
separately from that of the associated parameter.
BACTION | 93