2012

Next Locates the UCS on either the adjacent face or the back face of the
selected edge.
Xflip Rotates the UCS 180 degrees around the X axis.
Yflip Rotates the UCS 180 degrees around the Y axis.
Accept Accepts the changes and places the UCS.
3D objects can be created in AutoCAD.
Named
Saves or restores named UCS definitions.
TIP You can also right-click the UCS icon and click Named UCS to save or restore
named UCS definitions.
Restore
Restores a saved UCS definition so that it becomes the current UCS.
Name Specifies the name of the UCS definition to restore.
?—List UCS definitions Lists details about the specified UCS definitions.
Save
Saves the current UCS to a specified name.
Name Specifies the name for the UCS definition.
Delete
Removes the specified UCS definition from the list of saved definitions.
?—List UCS Definitions
Lists saved UCS definitions showing the origin and X, Y, and Z axes for each
saved UCS definition relative to the current UCS. Enter an asterisk to list all
UCS definitions. If the current UCS is the same as the WCS (World Coordinate
System), it is listed as WORLD. If it is custom, but unnamed, it is listed as NO
NAME.
1268 | Chapter 21 U Commands