2012

Increment Defines the length of each freehand line segment. You must move
the pointing device a distance greater than the increment value to generate
a line. (SKETCHINC on page 1659 system variable)
Tolerance For Splines, specifies how closely the spline’s curve fits to the
freehand sketch. (SKTOLERANCE on page 1660 system variable)
SNAP
Quick Reference
See also:
■ Adjust Grid and Grid Snap
Restricts cursor movement to specified intervals.
Access Methods
Menu: Tools ➤ Drafting Settings
Toolbar: Status bar ➤ Snap
Command entry: snap or ‘snap for transparent use
List of Prompts
The following prompts are displayed.
Specify snap spacing on page 1158 or [ON on page 1158/OFF on page 1159/Aspect
on page 1159/Style on page 1159/Type on page 1159] <current>: Specify a distance,
enter an option, or press Enter
Snap Spacing
Activates Snap mode with the value you specify.
On
Activates Snap mode using the current settings of the snap grid.
1158 | Chapter 19 S Commands