2012

The first attribute in the selection set is marked with an X. You can change
any properties of the attribute you select.
Enter an option [Value/Position/Height/Angle/Style/Layer/Color/Next] <N>:
Enter the property to change, or press Enter for the next attribute
If the original attribute was defined with aligned or fit text, the prompt does
not include Angle. The Height option is omitted for aligned text. For each of
the options except Next, ATTEDIT prompts for a new value. The X remains
on the current attribute until you move to the next attribute.
Value
Changes or replaces an attribute value.
Enter type of value modification [Change/Replace]: Enter c or r or press Enter
Change Modifies a few characters of the attribute value.
Either string can be null. The ? and * characters are interpreted literally, not
as wild-card characters.
Replace Substitutes a new attribute value for the entire attribute value.
If you press Enter, the attribute value is empty (null).
Position
Changes the text insertion point.
If the attribute is aligned, ATTEDIT prompts for both ends of a new text
baseline.
78 | Chapter 2 A Commands