2012

Current text style: "Standard" Text height: 0.2000
Specify start point of text or [Justify / Style]: Enter an option or press ENTER
Specify paper text height <current>: Specify a height, or press ENTER
The Specify Paper Text Height prompt is displayed only if the current text
style is .
For a description of each option, see
TEXT on page 1229.
NOTE For single-line attributes, you can enter up to 256 characters. If you need
leading blanks in the prompt or the default value, start the string with a backslash
(\). To make the first character a backslash, start the string with two backslashes.
When Multiple Line mode is on, -ATTDEF then displays several of the prompts
used by the MTEXT command. For a description of each option, see
MTEXT
on page 762.
Attribute Value (Constant Mode)
Specifies the value for a constant attribute. This prompt is displayed only if
you turn on Constant mode.
ATTDEF then displays the same prompts as the TEXT command, using the
attribute tag instead of requesting a text string. For a description of each
option, see
TEXT on page 1229.
When Multiple Line mode is on, -ATTDEF then displays several of the prompts
used by the MTEXT command. For a description of each option, see MTEXT
on page 762.
Location of Multiline Attribute (Multiple Line Mode)
Specifies the first corner of the bounding box for the multiple-line text. This
location is used as the starting point for the attribute.
Opposite Corner (Multiple Line Mode)
As you drag the pointing device to specify the opposite corner, a rectangle is
displayed to show the location and width of the multiple-line text. The arrow
within the rectangle indicates the direction of the text flow.
-ATTDEF | 73