2012

If the system variable, FILEDIA, is set to 0 instead of 1, a Command prompt
is displayed. If you set FILEDIA to 0, this prompt is displayed regardless of the
Startup setting.
QSAVE
Quick Reference
See also:
■ Save a Drawing
Saves the current drawing using the specified default file format.
Access Methods
Button
Menu: File ➤ Save
Toolbar: Standard
Summary
If the drawing is named, the program saves the drawing and does not request
a new file name. Use the SAVEAS command if you need to save a drawing
with a different name. If the drawing is read-only, use the SAVEAS command
to save the changed file under a different name.
If the drawing is unnamed, the Save Drawing As dialog box (see SAVEAS) is
displayed and the drawing is saved with the file name and format you specify.
NOTE The file format specified on the Open and Save tab of the Options dialog
box is used when saving a drawing with this command.
1050 | Chapter 17 Q Commands