2012

Sheets to Publish
Contains the list of drawing sheets to be included for publishing. Click the
page setup column to change the sheet’s settings. Use the shortcut menu to
add sheets or make other changes to the list.
Sheet Name Combines the drawing name and the layout name with a dash
(-). Includes the Model tab only if the Include Model When Adding Sheets
option is selected. You can copy sheets by clicking Copy Selected Sheets on
the shortcut menu. You can change the name shown in Sheet Name by clicking
Rename Sheet on the shortcut menu. Drawing sheet names must be unique
within a single DWF, DWFx, or PDF file. The shortcut menu also provides an
option for removing all the sheets from the list.
NOTE The drawing sheets that populate the Sheets to Publish list are controlled
by the PUBLISHALLSHEETS system variable.
Page Setup Displays the named page setup for the sheet. You can change the
page setup by clicking the page setup name and selecting another page setup
from the list. Only Model tab page setups can be applied to Model tab sheets,
and only paper space page setups can be applied to paper space layouts. Select
Import to import page setups from another DWG file through the Import Page
Setups for Publishing dialog box (a standard file selection dialog box).
Status Displays the status of the sheet when it is loaded to the list of sheets.
Show Details
Displays and hides the Selected Sheet Information and Selected Page Setup
Information areas.
Selected Sheet Details
Displays the following information about the selected page setup: plot device,
plot size, plot scale, and details.
Publish Options Information
Publish Options
Opens the
Publish Options dialog box, in which you can specify options for
publishing.
Publish Output
Number of Copies
Specifies the number of copies to publish. If the Publish to DWF, DWFx, or
PDF option is selected, the Number of Copies setting defaults to 1 and cannot
be changed. If a sheet's page setup specifies to plot to file, then the number
set in this option is ignored and a single plot file is created.
1026 | Chapter 16 P Commands