2012

PSPACE
Quick Reference
See also:
■ Work in Model Space
In a layout, switches from model space in a viewport to paper space.
Summary
The program switches from model space to paper space when you are working
on a named (paper space) layout.
On the named layout, use paper space to create a finished layout of a drawing
for printing. As part of designing your layout, you create layout viewports,
which are windows containing different views of the model. By switching
from paper space to model space (see MSPACE), you can edit the model and
views within the current layout viewport.
You can make a viewport current by double-clicking inside it. You can switch
to paper space by double-clicking an area of the paper space layout that is not
within a viewport.
When in paper space, you can also switch to model space by clicking Model
on the status bar. If you are in model space, you can switch to the last paper
space b clicking Paper on the status bar.
You can also switch between layout and model tabs at the bottom of the
drawing area.
NOTE The layout and Model tabs are only displayed if you have selected the
Display Layout and Model Tabs in the
Display Tab (Options Dialog Box) on page
847.
1022 | Chapter 16 P Commands