2012

NOTE For Windows system printers, you can change the paper size settings and
create custom paper sizes only in the Custom Properties dialog box.
Modify Standard Paper Sizes
Adjusts the printable area for standard paper sizes to match the printer's
capabilities. (You can't create custom paper sizes for Windows system printers
using the Plotter Configuration Editor.)
■ List of Standard Paper Sizes: Displays the available set of standard paper sizes.
■ Modify: Starts the Custom Paper Size wizard. You can modify Printable Area
and File Name. The new paper size is a user-defined size, not a standard
size.
Filter Paper Sizes
Filters the list of paper sizes displayed for the plotting device selected in the
Plot and Page Setup dialog boxes. The list of paper sizes is displayed on the
Plot Settings tab in the Plot dialog box and on the Layout Settings tab in the
Page Setup dialog box.
Select the paper sizes you want to display for this device.
■ Check All: Hides all the paper sizes for the device.
■ Uncheck All: Displays all the paper sizes for the device.
Plotter Calibration
Starts the Plotter Calibration wizard. If you need to correct scaling
discrepancies, you can adjust the plotter calibration using the Plotter
Calibration wizard. See “Calibrate Plotters and Work with Custom Paper Sizes”
in the Driver and Peripheral Guide.
NOTE You should perform a plotter calibration only if your drawings must be
exactly to scale and your plotter or printer produces inaccurate plots. Plotter
Calibration causes the program to rescale all plots sent to your plotter. If your
plotter provides a calibration utility, it is recommended that you use it instead of
the utility supplied with this program.
PMP File Attaches a PMP file to or detaches a PMP file from the PC3 file you
are editing. Use the Detach button to break the association between the PMP
file and the PC3 file.
■ Attach: Attaches a PMP file to the PC3 file. You can reuse calibration and
custom paper size data stored in the PMP file.
1004 | Chapter 16 P Commands