2012

Plot to File
Sends the drawing to the file specified in the Plot dialog box.
AutoSpool
Uses the AutoSpool utility to plot the drawing. AutoSpool is specified on the
Files tab in the Options dialog box.
Port List
Displays a list and description of available ports, both local and network. If
the port is a network port, the name of the network printer is also displayed.
Show All Ports
Shows all available ports on the computer regardless of the ports available on
the plotter.
Browse Network
Displays the network choices so you can connect to another instance of a
nonsystem plotter.
Configure Port
Displays either the
Configure LPT Port dialog box or the Settings for COM
Port dialog box
.
Device and Document Settings Tab (Plotter Configuration Editor)
Quick Reference
See also:
■ Overview of Plotting
Controls many of the settings in the PC3 file. Click the icon for any of the
nodes to view and change the specific settings. When you change a setting,
your changes appear in angle brackets (< >) next to the setting name. A check
mark is also displayed over the icon of the node with a changed value.
996 | Chapter 16 P Commands