2012

Places a plot stamp on a specified corner of each drawing and logs it to a file.
If you enter -plotstamp at the Command prompt, the following prompts are
displayed. The settings in the PSS file are displayed as defaults for each prompt.
You can use -PLOTSTAMP as part of a plotting script to modify plot stamp
information for a drawing.
LIst of Prompts
The following prompts are displayed.
Enter an option [On/OFF/Fields/User fields/Log file/LOCation/Text
properties
/UNits]:
On Turns on the plot stamp for the current drawing.
OFF Turns off the plot stamp for the current drawing.
Fields Specifies the plot stamp field information you want to apply to the
current plot stamp.
Stamp drawing name? [Yes/No] <Yes>:
Stamp layout name? [Yes/No] <Yes>:
Stamp date and time? [Yes/No] <Yes>:
Stamp login name? [Yes/No] <Yes>:
Stamp plot device name? [Yes/No] <Yes>:
Stamp paper size? [Yes/No] <Yes>:
Stamp plot scale? [Yes/No] <Yes>:
User Fields Specifies the user-defined fields you want to apply to the current
plot stamp.
Enter User field 1 <>: Enter any user-defined field
Enter User field 2 <>: Enter any user-defined field
Log File Specifies writing the current plot stamp information to a log file
rather than applying this information to the current plotted drawing. The
default log file is plot.log, unless you specify another file path.
Write plot stamp to log file? [Yes/No] <Yes>:
Enter log file path <plot.log>:
Location Determines the location of the plot stamp on the page based on
offset, orientation, and relationship to either the printable area or the border
of the paper.
Location selections include and are relative to the printable area or the border
of the paper, depending on what you specify at the prompt.
-PLOTSTAMP | 985