2012

specified in the original PC3 file, the following configuration information
may change when the PC3 file is saved:
■ Plot quality
■ Color depth
■ Resolution
■ Media source
■ Media destination
■ Media finishing options (such as folding or binding)
■ Any custom settings of the previous device or driver
If the plotter or printer you select can't support the paper size specified in the
layout, the default paper size is used. A warning is displayed that allows you
to cancel this operation and return to the Plot or Page Setup dialog box with
the None device selected.
Device For each selection you make under Printer Name, the corresponding
device driver name is displayed in this column, as follows:
■ For a selected plotter or printer, this column displays the device driver
name stored in the plotter or printer's PC3 file.
■ For a selected PC3 file, this column displays the device driver name stored
in the PC3 file.
■ For a selection of None, this column displays no device name. No device
will be substituted for the missing printer specified in the PC3 file.
Status Area
Displays information about the selected plotter, printer, or PC3 file.
Update and Save PC3 File
Displays the name of the PC3 file for the current layout. If you click OK
without changing the name of the PC3 file, the existing PC3 file is updated
with the new printer name. If you change the name of the PC3 file and click
OK, a copy of the PC3 file is saved with the new printer information.
974 | Chapter 16 P Commands