2011

7 Click OK to apply the hatch.
To fill an area with a solid color (ribbon turned on)
1 Click Home tab ➤ Draw panel ➤ Hatch.
2 On the Properties panel, click Solid from the Hatch Type drop-down list,
or click Solid on the Pattern panel.
3 (Optional) On the Properties panel, click a color override from the Hatch
Color drop-down list. Specify any other options as needed.
4 Specify a point inside each area that you want to fill.
5 Press Enter, or click Close on the ribbon to apply the hatch and exit the
command.
To fill an area with a solid color (ribbon turned off)
1 Start the Hatch command from a menu or toolbar.
2 In the Hatch and Gradient dialog box, Hatch tab, under Type and Pattern,
click Predefined from the Type drop-down list.
3 Click Solid from the Pattern drop-down list.
4 (Optional) Select a color override from the Color drop-down list. Specify
any other options as needed.
5 Under Boundaries, click Add: Pick Points.
6 Specify a point inside each area that you want to hatch and press Enter.
7 Click OK to apply the hatch.
Quick Reference
Commands
GRADIENT
Fills an enclosed area or selected objects with a gradient fill.
814 | Chapter 24 Hatches, Fills, and Wipeouts