2011

Update Block References
You can update attributes in all block references in the current drawing with
changes you made to the block definition. For example, you may have used
the Block Attribute Manager to modify attribute properties in several block
definitions in your drawing but elected not to automatically update existing
block references when you made the changes. Now that you are satisfied with
the attribute changes you made, you can apply those changes to all blocks in
the current drawing.
You can also use ATTSYNC to update attribute properties in block references
to match their block definition, or to update a block instance after you redefine
a block attribute using BLOCK, -BLOCK, or BEDIT.
Updating attribute properties in block references does not affect any values
that have been assigned to those attributes.
Edit Attributes in a Block Reference
You can select an attribute in a block reference and use the Properties palette
to change its properties, or you can use the Enhanced Attribute Editor to
modify all the attributes in a selected block reference.
See also:
■
Define Block Attributes on page 682
■ Modify a Block Definition on page 692
To edit attributes assigned to a block definition
1 Click Home tab ➤ Block panel ➤ Manage Attributes.
2 In the Block Attribute Manager, select a block from the Block list, or click
Select Block and select a block in the drawing area.
3 In the list of attributes, double-click the attribute you want to edit, or
select the attribute and click Edit.
4 In the Edit Attribute dialog box, make the attribute changes you want,
and then click OK.
Modify a Block Attribute Definition | 697