2011

Table Of Contents
To set chamfer distances
1 Click Home tab Modify panel Chamfer.
2 Enter d (Distances).
3 Enter the first chamfer distance.
4 Enter the second chamfer distance.
5 Select the lines for chamfering.
To chamfer two nonparallel line segments
1 Click Home tab Modify panel Chamfer.
2 Select the first line.
3 Select the second line.
To chamfer by specifying chamfer length and angle
1 Click Home tab Modify panel Chamfer.
2 Enter a (Angle).
3 Enter the distance from the corner to be chamfered along the first line.
4 Enter the chamfer angle.
5 Select the first line. Then select the second line.
To chamfer without trimming
1 Click Home tab Modify panel Chamfer.
2 Enter t (Trim Control).
3 Enter n (No Trim).
4 Select the objects to chamfer.
604 | Chapter 17 Change Existing Objects