2011

Table Of Contents
6 Enter the new angle, or specify a point.
The value that you enter for the new angle is an absolute angle, not a
relative value. Alternatively, if you specify a point, the reference angle
will be rotated to that point.
Quick Reference
ROTATE
Rotates objects around a base point.
Align Objects
You can move, rotate, or tilt an object so that it aligns with another object.
In the following example, two pairs of points are used to align the piping in
2D using the ALIGN command. Endpoint object snaps align the pipes precisely.
To align two objects in 2D
1 Click Modify menu 3D Operations Align.
2 Select the objects that you want to align.
3 Specify a source point and then the corresponding destination point. To
rotate the object, specify a second source point followed by a second
destination point.
4 Press Enter to end the command.
The selected objects are moved from the source point to the destination
point, and second and third points, if you specify them, rotate, and tilt
the selected objects.
Move or Rotate Objects | 575