2012

You could run a script at startup to open a drawing by using the following
syntax in the Run dialog box:
ACADLT drawing_name /b setup
All file names that contain embedded spaces must be enclosed in double
quotes, for example, “guest house”.
You can also specify the view that is displayed when the drawing opens by
using the /v switch and the view name. The /b switch and the script file must
be the last parameter listed.
Including the file extensions .exe, .dwg, .dwt, and .scr is optional. If AutoCAD
LT cannot find the script file, AutoCAD LT reports that it cannot open the
file.
To run the same script at startup but create a new drawing using the
MyTemplate.dwt file as the template, enter the following in the Run dialog box:
ACADLT /t MyTemplate /b setup
This command creates a new drawing and issues a sequence of setup commands
from the setup.scr file. When the script has finished running, the command
prompt is displayed.
If you want to use the default template for the new drawing, you can omit
the /t switch and the template file name.
NOTE You can no longer use this method to start a new drawing and give it a
name. Name the drawing when you save it.
To run a script at startup
1 Click Start menu (Windows) ➤ Run.
2 In the Run dialog box, enter acadlt drawing_name
/b script_name.
To start a new file, instead of a drawing file name, enter the /t switch and
the name of a template file: /t template_drawing.
To open a drawing file to a particular view, follow the drawing name
with the /v switch and the name of the view: /v view_name.
The name of the script file must be the last parameter listed. The file
extensions are optional.
3 Click OK.
AutoCAD LT opens the drawing and executes the commands in the script
file. When the script has been completed, the command prompt is
displayed.
Run Scripts at Startup | 351