2013

to the flyout. Release the button over a tool from the flyout to execute the
associated macro.
Separators can be added to a flyout to help provide an additional level of
organize. When a separator is added to a flyout, a solid horizontal line is
created across the flyout when it is displayed. A separator can be added to a
tool group, but it is used to control which commands and flyouts are displayed
by default and those that are available only when the tool group is expanded.
See also:
Customize Commands (page 36)
Create and Manage Tool Sets
To create a tool set
1 At the Command prompt, enter cui and press Enter.
2 In the Customize dialog box, Tool Sets tab, Tool Sets list, select the tool
set in which you want to create the new tool set after.
3 Click the Create Tool Set Element (+) button below the Tool Sets list and
click Add Tool Set.
A new tool set (named Tool Set1) is created. The default name changes
based on the number of tool sets you previously created.
4 Enter a name for the new tool set.
The name entered is what will appear on drop-down menu when the
Tool Sets button is clicked near the top of the Tool Sets palette. Click a
tool set name twice to rename it.
5 Expand the new tool set.
6 In the Commands list, drag a command to the default tool group under
the new tool set.
7 Release the button on the pointer device when the tool group or flyout
is highlighted, or the desired location for the command is indicated by
a horizontal line.
For information about creating a command, see
Create, Edit, and Reuse
Commands
(page 37).
To create a tool group
1 At the Command prompt, enter cui and press Enter.
58 | Chapter 4 User Interface Customization