2013

NOTE
If you hold the cursor over a menu or sub-menu, it will expand over a
short interval of time.
4 Release the button on the pointer device when a menu or sub-menu is
highlighted, or the desired location for the command is indicated by a
horizontal line.
For information about creating a command, see
Create, Edit, and Reuse
Commands
(page 37).
To change the display name for a pull-down menu, sub-menu, or command
1 At the Command prompt, enter cui and press Enter.
2 In the Customize dialog box, Menus tab, Menus list, select a menu,
sub-menu, or menu item so it is highlighted.
3 You need to click in the Display Name column to edit the name displayed
for a menu item.
4 Click the menu or menu item again to edit its name or display name.
5 Enter the new name and press Enter.
To insert a separator
1 At the Command prompt, enter cui and press Enter.
2 In the Customize dialog box, Menus tab, Menus list, select a sub-menu
or menu item to insert a separator after.
3 Click the Options action menu below the Menus list, Gear icon, and
click Insert Separator.
To duplicate a pull-down menu, sub-menu, command, or separator
1 At the Command prompt, enter cui and press Enter.
2 In the Customize dialog box, Menus tab, Menus list, select a menu,
sub-menu, command, or separator item to duplicate.
3 Click the Options action menu below the Menus list, Gear icon, and
click Duplicate.
4 Enter a new name for the duplicated item.
Customize User Interface Elements | 55