2013

DescriptionAttribute
List of support paths used by this set of components
separated by a semicolon. The support paths should be
relative to the plug-in bundle.
SupportPath
Localized support paths can be specified by combining
SupportPath with a locale code. See Supported Locale
Codes (page 103) for a full list of supported locale codes.
ComponentEntry Element
The ComponentEntry element is required and is used to specify details about
each individual component in the Components element.
You can specify as many ComponentEntry elements as needed. Component
types can be one of the following file formats:
 AutoLISP (LSP)
 AutoLISP Fastload (FAS)
 ObjectARX (ARX)
 ObjectDBX (DBX)
A ComponentEntry element may contain a
Commands element (page 102) if
the LoadReasons attribute is set to LoadOnCommandInvocation.
NOTE ComponentEntry elements are loaded in the order they are listed, but from
the bottom up. Therefore, any files that other components are dependent on must
be lower down the list. For example, if an ObjectARX module is dependent on an
ObjectDBX module, then the ObjectARX module will need to appear above the
ObjectDBX module in the list.
A ComponentEntry element can have any of the following attributes attached
to it:
DescriptionAttribute
Optional for AutoLISP; Required for ObjectARX - Com-
ponent name; same as AppName in the ObjectARX API
AcadAppInfo class.
AppName
Install and Uninstall Plug-In Applications | 99