2013

List of Prompts
The following prompts are displayed.
Current wire frame density: SURFTAB1=current SURFTAB2=current
Object to revolve Select a line, arc, circle, or 2D or 3D polyline.
Object that defines axis of revolution Select a line or open 2D or 3D polyline.
The axis direction cannot be parallel to the plane of the original object.
The path curve is swept about the selected axis to define the mesh. The path
curve defines the N direction of the mesh. Selecting a circle or a closed polyline
as the path curve closes the mesh in the N direction.
The vector from the first to the last vertex of the polyline determines the
rotation axis. Any intermediate vertices are ignored. The axis of revolution
determines the M direction of the mesh.
Start Angle If set to a nonzero value, starts the mesh of revolution at an offset
from the generating path curve.
Specifying a start angle starts the mesh of revolution at an offset from the
generating path curve.
918 | Chapter 2 Commands