2013

Axis Start Point Specifies the first point of the axis of revolution. The positive
axis direction is from the first to the second point.
Axis Endpoint Sets the endpoint for the axis of revolution.
Start Angle Specifies an offset for the revolution from the plane of the object
being revolved.
Drag your cursor to specify and preview the start angle of the object.
Angle of Revolution Specifies how far the selected object revolves about the
axis.
A positive angle revolves the objects in a counterclockwise direction. A negative
angle revolves the objects in a clockwise direction. You can also drag the cursor
to specify and preview the angle of revolution.
Object Specifies an existing object to be used as an axis. The positive axis
direction is from the closest to the farthest endpoint of this object.
You can use lines, linear polyline segments, and linear edges of solids or
surfaces as an axis.
NOTE Select an edge subobject by pressing Ctrl while you select an edge.
X (Axis) Sets the positive X axis of the current UCS as the positive axis
direction.
R Commands | 915