2013

QNEW
Starts a new drawing from a selected drawing template file.
Summary
QNEW creates a new drawing from the default drawing template file and
folder path specified in Default Template File Name for QNEW in the
Application section of the Application Preferences dialog box.
When a default drawing template file is set to None or is not specified, QNEW
displays the Select Template File dialog box (a
standard file selection dialog
box
(page 723)).
If the system variable, FILEDIA, is set to 0 instead of 1, a
Command prompt
(page 714) is displayed.
See also:
Use a Drawing Template File
QSAVE
Saves the current drawing using the specified default file format.
Access Methods
Menu: File  Save
Summary
If the drawing is named, the program saves the drawing and does not request
a new file name. Use the SAVEAS (page 926) command if you need to save a
drawing with a different name. If the drawing is read-only, use the SAVEAS
command to save the changed file under a different name.
If the drawing is unnamed, the Save Drawing As dialog box (see
SAVEAS (page
926)) is displayed and the drawing is saved with the file name and format you
specify.
See also:
Save a Drawing
872 | Chapter 2 Commands