2013

Rotate Activates the 3D Rotate gizmo.
Scale Activates the 3D Scale gizmo.
Set Constraint Sets whether the change is constrained to a specific axis.
 X, Y or Z. Restricts the change to the designated axis.
 XY, YX, or ZX. Restricts the change to a plane that is defined by the
selected axes.
 XYZ. Applies the scaling uniformly to all axes.
NOTE
Unlike most other objects, mesh objects support non-uniform scale.
Relocate Gizmo Moves the gizmo to the point you specify.
Align Gizmo With Sets the alignment for the change. Options include:
 World UCS
 Current UCS
 Face
Custom Gizmo Allows you to define the current gizmo by specifying one,
two, or three points, or an object.
Respect Dynamic UCS When relocating the gizmo, as you move the cursor,
temporarily aligns the XY plane of the UCS with the faces or edges.
See also:
Use Gizmos to Modify Objects
3DSWIVEL
Changes the target of the view in the direction that you drag.
Access Methods
Menu: View  Camera  Swivel
Shortcut menu: Start any 3D navigation command, right-click in the drawing
area, and click Other Navigation Modes  Swivel (5).
3D Commands | 53