2013

Specifies the location of the plot stamp parameter file.
Load
Displays the Plotstamp Parameter File Name dialog box (a standard file
selection dialog box) in which you can specify the location of the parameter
file you want to use.
Save As
Saves the current plot stamp settings in a new parameter file.
Show/Hide Advanced Settings
Expands or collapses the Advanced Settings section towhich contains
placement and text options for the plot stamp.
Location and Offset
Determines the plot stamp location, the orientation of the plot stamp, and
the offset you want to apply relative to either the printable area or the paper
border.
Location
Indicates the area where you want to place the plot stamp. Selections include
Top Left, Bottom Left (default), Bottom Right, and Top Right. The location is
relative to the image orientation of the drawing on the page.
Orientation
Indicates the rotation of the plot stamp in relation to the specified page. The
options are Horizontal and Vertical for each of the locations (for example,
Top Left Horizontal and Top Left Vertical).
Stamp Upside-Down
Rotates the plot stamp upside down.
X Offset
Determines the X offset value that is calculated from either the corner of the
paper or the corner of the printable area, depending on which setting you
specify. If you specify Offset Relative to Paper Border, the offset value is
calculated so that the plot stamp information fits within the paper size.
Y Offset
Determines the Y offset value that is calculated from either the corner of the
paper or the corner of the printable area, depending on which setting you
specify. If you specify Offset Relative to Paper Border, the offset value is
calculated so that the plot stamp information fits within the paper size.
814 | Chapter 2 Commands