2013

NOTE Drawing orientation is also affected by the PLOTROTMODE (page 1438)
system variable.
Print Options
Specifies which advanced print settings should be used for printing. Select
AutoCAD to use the page setup assigned to the layout. See the Mac OS Help
documentation for information on the other options.
Page Setup
Lists the named page setup assigned to the layout and allows you to edit the
page setup settings for the layout.
Name Displays the name of the assigned page setup.
Edit Page Setup Displays the
Page Setup dialog box (page 757) in which you
can edit the page setup settings for the layout.
What to Print
Specifies the area of the drawing to be plotted.
Display Outputs the view in the current viewport in the current layout.
Extents Outputs the portion of the current space of the drawing that contains
objects. All geometry in the current layout is outputted. The drawing may be
regenerated to recalculate the extents before outputting.
Model/Layout Views Outputs a view that was previously saved with the
-VIEW (page 1139) command.
Window Outputs any portion of the drawing that you specify. When you
specify the two corners of the area to output, the Window button becomes
available.
Click the Window button to use the pointing device to specify the two corners
of the area to be outputted, or enter coordinate values.
Layout/Limits When outputting a layout, everything within the printable
area of the specified paper size, with the origin calculated from 0,0 in the
layout.
When outputting from the Model layout, the entire drawing area that is
defined by the grid limits. If the current viewport does not display a plan view,
this option has the same effect as the Extents option.
Scale
Controls the relative size of drawing units to plotted units.
NOTE If the Layout option is specified in What to Print, the layout is plotted at
1:1 regardless of the setting specified in Scale.
806 | Chapter 2 Commands