2013

AutoCAD units. If INSUNITS has a value such as millimeters, centimeters,
inches, or feet, and the underlay has resolution information, the scale factor
is applied after the true width of the underlay in AutoCAD units is determined.
Rotation Specifies the rotation angle of the selected PDF underlay.
See also:
Attach PDF Files as Underlays
PDFCLIP
Crops the display of a selected PDF underlay to a specified boundary.
Access Methods
Command entry: PDF Underlay visor  Create the Clipping Boundary
Shortcut menu: Select a PDF underlay. Right-click in the drawing area and
click Clip PDF.
Summary
The clipping boundary determines the portion of an image outside the
boundary that is hidden. The visibility of the clipping boundary is controlled
by the PDFFRAME and FRAME system variables.
The boundary you specify must be in a plane parallel to the PDF underlay.
TIP Use the CLIP (page 201) command to clip any type of referenced file: images,
external references, viewports, and PDF underlays.
List of Prompts
The following prompts are displayed.
On
Turns on clipping and displays the PDF underlay clipped to the previously
defined boundary.
Off
Turns off clipping and displays the entire PDF underlay and frame.
If you re-clip the PDF underlay while clipping is turned off, clipping is
automatically turned back on. You are prompted to delete the old boundary
even when clipping is turned off and the clipping boundary is not visible.
P Commands | 777